XADO Twin Turbo Complex Oil Additive Wear Protection for High Performance Cars

Description

start_elivehelp_btncode
end_elivehelp_btncode
Innovative 4-component product which combines advantages of metal conditioner, 2D sliding agent and complex adaptive Revitalizant Oil Additive
Benefits
Restores surfaces of parts and compensates the ongoing wear;
Levels and increases compression in cylinders;
Increases pressure in the oil system up to the nominal one;
Creates the active system of parts protection from loads and overheating;
Reduces noise and vibrations;
Improves oil lubricating properties and tribological characteristics of the engine assemblies;
Increases the service life span of the engine;
Reduces fuel consumption;
Increases engine capacity and acceleration capability.
Application instructions
Make sure that compound's temperature is about 77°F (average room temperature)
Shake the bottle
Turn on the engine
Idle or drive the car until oil temperature will warm up.
Turn off the engine
Pour the compound into the oil filler of the engine.
Start the engine again and idle it for 3–5 minutes.
Drive your car as usual.
After 600-760 miles the restoration process will be finished
Note
Specially designed for engines of cars.
The product can also be applied to light trucks, small buses and engines of other equipment with the oil system capacity of 3–10 L.
Compatible with all types of motor oils.
Revitalization® takes place during 1,000–1,200 km (600–760 miles) of run.
It is not recommended to change oil during this period.
The repeated application of AMC Maximum Twin Turbo is recommended after 100,000 km of run;
The product contains granules of atomic Revitalizant®, which completely dissolve in motor oil under operating temperature
Dosage
1 bottle (360 ml) for the engine with the oil system capacity of 3–10 L.
Oil level should not exceed the maximal level of the dipstick. Avoid overdosing.